Introduction
You are going to need to download several tools first:
1) LG G2 Driver for PC:
- You may download them from the LG Official Website:
- Or #here if you want it from our Google Drive).
-
-
Install the LG G2 Driver (and download it first if you haven't done so already).
-
Install the LG Once-Click Root Program (and download it first if you haven't done so already).
-
Download the AutoRec apk file, the bootloader, the MOKEE ROM and theLambda kernel (of the appropriate phone model) if you haven't done so already.
-
There is no need to unzip these files .
-
Download all of the files from the link.
-
Connect the phone to the PC. Move all those files into the /Donwloads folder (or any other of your choosing).
-
The location is not too important, as long as you remember where you left them!
-
-
-
Open LG One-Click Root Program
-
Click start
-
Plug in phone to PC, make sure USB debugging is on and click OK if the phone asks for permission to share keys etc.
-
The phone will reboot at around 45%, make sure the phone USB debugging allows the PC to connect. The phone will reboot again at 90%.
-
If it’s stuck at 90% while the phone screen shows firmware update (펌웨어 업데이트), wait for about 3-5 minutes then unplug. If it’s unplugged too early there may be a chance of bricking the phone.
-
-
-
If the phone gets bricked in any stage of rooting or upgrading process, follow the “What’s bricked” section of General Tips section.
-
-
-
Perform the following steps on the phone
-
Go to File Manager / File explorer (download any file exploration app from Google Apps if there isn’t default one) and find AutoRec apk in /Downloads.
-
Adjust security settings to allow for installation from 3rd parties.
-
Click “Flash recovery”
-
Click “To recovery”
-
-
-
The phone will boot into recovery mode and start TWRP.
-
Install bootloader. Install > Load bootloader zip file (something like F320L_KK_bootloader_plus_LP_bootstack.zip) > Swipe to flash. *Don’t check “check for md5” or other security settings*
-
Go back to TWRP Menu.
-
Fullwipe ▶ Wipe - Advanced Wipe - Dalvik cache, System, Data, Cache
-
Go back to TWRP Menu.
-
-
-
Install MOKEE ROM. Install > Load MOKEE ROM zip file > Swipe to flash. *Don’t check “check for md5” or other security settings*
-
Go back to TWRP Menu.
-
Install Lambda Kernel. Install > Load Lambda Kernel zip file > Swipe to flash. *Don’t check “check for md5” or other security settings*.
-
Go back to TWRP Menu.
-
Reboot > Power off.
-
-
-
Turn on the phone....wait for about 5-7 minutes. It will show MOKEE logo, then seemingly reboot into LG logo, then MOKEE logo with 3 loading dots. It takes long on this loading screen.
-
Fill in initial settings for the phone.
-
Done!
-
Cancel: I did not complete this guide.
One other person completed this guide.
