Introduction
This guide will show you the steps to follow to prepare the Raspberry Pi to get back to work after a crash.
-
-
Unplug everything from the Raspberry Pi and make sure it´s not powered (turn the power button on the side off).
-
Connect the following to the Raspberry Pi, one by one:
-
MicroSD Card
-
USB Keyboard and mouse
-
HDMI or VGA Cable
-
Power supply (using a power cable connected to the powerbank)
-
Ethernet cable (or connect to a Wi-Fi hotspot if available)
-
-
-
Connect the following to the monitor:
-
HDMI Cable
-
Power supply (from normal wall socket)
-
-
-
Connect the following to the Pi:
-
Ethernet cable (or connect to the same Wi-Fi hotspot that you used for the Raspberry Pi)
-
Power supply (using a power cable to the powerbank)
-
If you cannot connect the Raspberry Pi to the internet via ethernet, use the network icon on the top right corner to connect to the internet.
-
You may learn more about this procedure here.
-
