Difficulty
Moderate
Steps
2
Time Required
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
-
-
a) If that’s ON (light on Raspberry Pi)-> check the connection between LED and Raspberry Pi, and reconnect by following the GPIO map(3.3V and Ground),
-
--if the LED OUTSIDE BOX still off after the reconnection, the LED may be broken. Then, just replace the outer LED with a new one.
-
b) If LED of Raspberry Pi is OFF---check the connection between the power bank and Raspberry Pi and reconnect it.
-
c) If (b) does not work, check the battery level on power bank and light on router. If those two are off, it means the power bank is damaged and needs to be changed when you go back to HQ.
-
-
-
If the switch is broken, you need to rebuild the switch or replace the switch with a new switch.
-
Further instructions on rebuilding the switch is on the MedEasy workshop document. Please contact Team MedEasy for further help.
-
