Skip to main content

Introduction

Follow the triage procedure from start to end using this guide.

  1. Tap the "Triage" button on the landing page (main menu). Tap the "+" button. Tap "Scan Iris" to begin iris scanning.
    • Tap the "Triage" button on the landing page (main menu).

    • Tap the "+" button.

    • Tap "Scan Iris" to begin iris scanning.

    • Refer to the Iris Scanning Guide to see the corresponding procedure.

    • Enter the name of the patient after his/her iris has been successfully recorded. Before saving, copy this name.

    • Now the patient has its iris' data recorded in the system, under his/her name.

  2. Back in the landing page (main menu), tap "Add manually" and then tap "New Patient". Enter the patient's tag number and name. The name should be exactly the same as the one entered after the iris scanning procedure (you may paste what you had copied here). Do NOT use too many digits in the tag number. Otherwise, the app may crash.
    • Back in the landing page (main menu), tap "Add manually" and then tap "New Patient".

    • Enter the patient's tag number and name. The name should be exactly the same as the one entered after the iris scanning procedure (you may paste what you had copied here).

    • Do NOT use too many digits in the tag number. Otherwise, the app may crash.

    • The "Given Name" field is compulsory and must be filled out.

    • Fill in all other personal information of the patient as requested by the app.

  3. Tap the "Vital Signs" button. Enter the vital signs of the patients, and then tap the ✔ symbol on the top right corner when done. Tap the "Triage Remark button"
    • Tap the "Vital Signs" button.

    • Enter the vital signs of the patients, and then tap the ✔ symbol on the top right corner when done.

    • Tap the "Triage Remark button"

    • Enter any remark for the patient. Tap on the ✔ button on the top right corner when done.

    • If you have scanned the patient's left eye, you must indicate this here.

    • If no remark, tap on the slider to turn it off. Tap the ✔ button on the top right corner when done.

    • Now, the patient's personal and medical information are stored with the iris data.

  4. Scan either of the patient's irises by following the procedure listed in the Iris Scanning Guide. If the patient's irises and information were enrolled before, his/her name will be displayed in a pop-up window.
    • Scan either of the patient's irises by following the procedure listed in the Iris Scanning Guide.

    • If the patient's irises and information were enrolled before, his/her name will be displayed in a pop-up window.

    • Tap on the "GET PATIENT DATA" button to proceed to the "Search by name" page.

    • Tap on the patient's name to proceed to the personal and medical information page.

  5. Whenever the iris scanner fails to function, the Medeasy kit can still work. In this scenario, the patientś name will have to be input manually.
    • Whenever the iris scanner fails to function, the Medeasy kit can still work. In this scenario, the patientś name will have to be input manually.

    • In the Triage meny, tap on the "+" button.

    • Then, tap on the "Search" button.

    • You may now type the patient's name and find his/her file by hand.

Finish Line

Admin MedEasy

Member since: 04/24/2017

3,430 Reputation

28 Guides authored

0 Comments

Add Comment